Technology

Powerful battery charger from Victron for 24V batteries with wireless monitoring function. Ready for Bluetooth Smart The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features are available.Simply download the app to your smartphone and connect to the battery charger via Bluetooth. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm: Test- Bulk - Absorption - Recondition - Float - Storgage.The Blue Smart charger is characterized by its microprocessor-controlled, adaptive battery management. Adaptive means that the charging process is automatically adapted to the type of battery usage. Storage mode: Less maintenance and aging when the battery is not in use:Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a charge retention voltage phase algorithm. The NIGHT and LOW settings When the charger is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Smart charger does not fail.

High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.

Powerful battery charger from Victron for 24V batteries with wireless monitoring function. Ready for Bluetooth Smart The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger when new features are available.Simply download the app to your smartphone and connect to the battery charger via Bluetooth. High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm: Test- Bulk - Absorption - Recondition - Float - Storgage. The Blue Smart charger features microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adapted to the type of battery use. Storage mode: Less maintenance and aging when the battery is not in use:Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged with a simple constant current phase ? Constant voltage phase ? Charge maintenance voltage phase algorithm. The NIGHT and LOW settings When the charger is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Smart charger does not fail.

The Blue Smart IP65 charger is the new professional battery charger with built-in Bluetooth! The Blue Smart IP65 charger can be used with equipment in your workshop or with motor vehicles such as (classic) cars, motorcycles, boats and motorhomes. The battery is charged, in a smart way.... until it reaches the perfect state. The seven-stage charging algorithm gets the best out of your battery. The charger provides the battery with the energy it needs, keeping it in a healthy state, ensuring better performance... and a longer life. Restore deep-discharged "dead" batteries. Unlike other brands, the Blue Smart IP65 charger will attempt to recharge a deep-discharged battery by imposing a weak charging current on it. Normal charging operation will then resume once sufficient voltage is applied between the battery terminals. Easy connection of the battery The charger comes with both alligator clips and M8 cable lugs - making it very easy to connect to the battery. You can leave the unit connected at all times if you wish. Check the status of your battery remotely The Blue Smart IP65 charger features built-in Bluetooth. This allows you to check the status of the charger and battery on a smartphone, tablet or laptop. All charger settings can be configured using the VictronConnect app. With integrated Bluetooth function Protection against splash water, dust and chemicals Seven-stage intelligent charging algorithm. Recovery of fully discharged "dead" batteries Automatic power supply function Automatic temperature compensation at high or low temperatures Several other functions to extend battery life Low energy mode for charging small batteries Lithium-ion battery mode

Main features 12V 50A: Can be used for cars, trucks, agricultural machines, buses, construction vehicles and motor homes. material: metal part made of tinned copper, plastic material made of PA 66, window made of PA 6T transparent window on both sides the housing is color coded on both sides according to ISO 8820 rated current indication on both sides in OCR writing visible melting conductor heat resistant (300 °C) according to UL-94-VO (UL-94 test for flammability of plastics, VO = extinguishing of flame within 10 seconds) replace sheet metal strip fuses for bolt fixing M6 Application: e.g. Alfa Romeo, Audi, BMW, Chevrolet, Citroen, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Lancia, Mazda, Mercedes-Benz, Mitsubishi, Opel, Peugeot, Renault, Rover, Seat, Skoda, Volvo, Volkswagen

Der neue Standard in mobiler Energieversorgung. Die EcoFlow DELTA PRO Wir stellen vor: Die Zukunft der tragbaren Energiespeicher. Die EcoFlow DELTA PRO ist ein tragbarer Solarstrom Generator. Er bietet dir zuverlässige Power für Outdoor Abenteuer, Zuhause und in Notfallsituationen. Zudem kann die Delta Pro über das Smart Home Panel direkt an die Stromversorgung Zuhause angeschlossen werden. Mit der enormen Kapazität von 3600 Wh und dem 3600 W Wechselrichter, kann der DELTA so gut wie jedes Gerät mit Strom versorgen. Egal ob es sich um einen Kühlschrank, Licht, medizinisches Gerät oder Werkzeug handelt. Die EcoFlow DELTA eignet sich also vor allem für den Camping- und Outdoor Bereich, wenn keine Steckdosen verfügbar sind. Egal ob im Urlaub oder im eigenen Garten, die Power Station ermöglicht Radio hören oder ein Fußballspiel auf einem Beamer schauen, ohne dabei einen Stromanschluss in der Nähe haben zu müssen. Extreme Ladegeschwindigkeit: Voll aufgeladen in unter 2 Stunden: Die EcoFlow X-Stream Charge Technologie lädt die Powerstation von 0-80 % in nur 1 Stunde und auf 100 % in 100 Minuten auf - die schnellste Powerstation auf dem Markt. Die erste Powerstation, die über eine Ladestation für Elektrofahrzeuge geladen werden kann und mithilfe von der Multicharge Technologie auf 6500 W Ladeleistung kommt. Universeller Solar Eingang: Mobil wiederaufladbar durch Solar oder 12 V Zigarettenanzünder - Die EcoFlow DELTA kann mit bis zu 1600 W Solar versorgt werden und benötigt auf diese Weise 4-8 h Ladezeit für eine Vollladung. Mit dem 12 / 24 V Zigarettenanzünder benötigen die 3600 Wh ca. 21 h um voll geladen zu werden. Durch die genannten Möglichkeiten kann der EcoFlow Delta Max überall, auch offgrid, aufgeladen werden. Kompatibel mit allen Geräten: Die DELTA Pro setzt neue Standards im Segment batteriebetriebener Powerstations. Kombinierbar mit einem breiten Spektrum an Geräten können alle 13 Ausgänge gleichzeitig versorgt werden: 4 x Wechselstromsteckdose, 2x USB-C, 4x USB-A (2 Normale + 2 Schnellladung), 1x 12 V Zigarettenanzünder und 2x DC5521 Rundstecker. Fühl dich wie zu Hause:  Kann alle 13 Ausgänge mit Strom versorgen und gleichzeitig geladen werden  - so bleibst du stundenlang autark! Einfache Handhabung - flexible Möglichkeiten: 4x 3600 W Wechselstromausgänge, bei 3600 Wh Kapazität - Der großzügig dimensionierte Wechselrichter ermöglicht es der DELTA so gut wie alle Haushaltsgeräte oder Werkzeuge bis 3600 W Dauerleistung (7200W Spitzenleistung) zu versorgen. Zudem ist es möglich auch während die EcoFlow DELTA geladen wird, alle Geräte mit Strom zu versorgen. LCD-Bildschirm- alles auf einen Blick: Die EcoFlow DELTA Pro verfügt über eine LCD-Anzeige mit Lade- / Entladezeit, Temperatur und Batteriestatus sowie Leistungsmesswerten, um jederzeit einen perfekten überblick zu garantieren. Sicher im Betrieb: Wenn der Eingangsstrom während eines Ladevorgangs kontinuierlich 20 A überschreitet, springt der Überlastschutzschalter automatisch heraus. Hoch- / Niedrigtemperaturschutz Wenn die Batterietemperatur von der EcoFlow DELTA PRO höher als 45 °C (niedriger als -20 °C) ist, werden alle Ein- und Ausgangsfunktionen gestoppt. Sobald die Batterie wieder ihre normale Arbeitstemperatur erreicht hat, nimmt die EcoFlow DELTA den Betrieb automatisch wieder auf. Lieferumfang: EcoFlow DELTA Pro AC 220 V Netzladekabel 12 V Kfz-Ladekabel DC5521 auf DC5525 Adapter Griffabdeckung Bedienungsanleitung und Garantiekarte

Technical data: H07RN-F 3G2,5 CEE plug 3-pole / 230V / 16A CEE-coupling 3-pole / 230V 16A with hinged cover IP44 certified tested according to VDE 0285-525-2-21; IEC 60309

To fix the foldable bracket.

Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger when new software functions become available can be done with any Bluetooth enabled smartphone, tablet or other device. Fully programmable - Battery charging algorithm (configurable) or fixed output.- Intelligent generator compatibility: engine run detection. Adaptive 3-stage charging algorithm: constant current -constant voltage -maintenance For lead acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery fully charges.For lithium batteries, the recording time is fixed, by default 2 hours.Alternatively, a fixed output voltage can be selected. Remote on/off A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the H (right) terminal of the two-pin plug can be connected to a battery positive terminal or the L (left) terminal of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example). All models are short-circuit proof and can be connected in parallel to increase output current. An unlimited number of units can be connected in parallel. Overtemperature protection The output current is reduced at high ambient temperatures. Protection class IP43 When the screw terminals on the device are installed facing downwards. Screw terminals No special tools are required for installation. Input fuse (not replaceable)

The 1.8m VE.Direct Cable from Victron is needed to connect devices that should communicate with each other via the VE-Direct port. For example, the BlueSolar controllers and the MPPT Control remote control panel. So the following connections can be made with it: Victron BlueSolar MPPT controller to Victron Color Control GX panel. Victron BlueSolar MPPT controller to MPPT Control remote panelBMV70xxx series to Color Control GX Panel BMV60xxx series to Color Control GX Panel Phoenix Inverter 12V 24V 48V 250W-500W to Color Control GX Panel VE.Direct cables are not included with these device series and are available in lengths from 0.3 to 10m. Scope of delivery:1x Victron ASS030530203 1,8m VE.Direct Cable

ROBUST AND RELIABLE The Dometic CFX3 SLD55 cooler pull-out provides maximum convenience for your outdoor adventures. Convenient pull-out mechanism for easy access to cooler contents in motorhomes, vans, trucks, SUVs, caravans or boats. Made of sturdy material, the CFX3 SLD55 cooler pull-out offers a high load capacity of 100 kg. A tight-closing locking system eliminates rattling noises while driving while securing the cooler. Each CFX3 cooler pullout comes with mounting straps and mounting screws so the cooler pullout can either be permanently mounted or removed at any time. Redefining boundaries. ... AND MORE Suitable for CFX3 55 and CFX3 55IM as well as older CFX models of similar size Maximum load capacity 100 kg Fully extendable for easy access to cooler contents Firm-closing latch prevents rattling noises while driving Dust protection prevents contamination of the slide rails Optimized, weight-reduced design Mounting straps and M6 screws included

WATTSTUNDE®SunFolder solar module Generate solar energy simply and innovatively - with the new WATTSTUNDE® SunFolder solar bag it's quick and easy. Unfold the bag, connect it and generate energy. Lightweight, innovative and flexibleThanks to its innovative design, the WATTSTUNDE® SunFolder 140Wp solar bag is very light, absolutely space-saving and therefore offers a high degree of flexibility and usability. The solar bag scores with its ability to be freely aligned at any time. Whether behind the windscreen when parked or simply outdoors. You can place the solar bag wherever the sun shines. In addition, you are guaranteed a high energy yield from the SunPower Back-Contact solar cells. Thanks to the durable and water-repellent Cordura fabric, the bag can also be used in the rain. Practical feet allow the solar modules to be placed at an angle so that the solar radiation can be used optimally. Plug & Play with practical plug-in systemThe SunFolder solar bag from WATTSTUNDE® has a 5m long connection cable with an Anderson plug-in system at the end. Thanks to the practical plug-in system, the connection plug can be permanently attached to the charge controller and, if required, the solar bag can be taken out, hung in the sun or placed in the sun and you simply plug the two Anderson mating plugs together and the SunFolder is connected to the charge controller. It could hardly be quicker and more practical. Self-sufficient with SunPower solar cellsThe SunFolder solar pockets of the WATTSTUNDE® series are high-quality modules with SunPower cells that deliver optimum results and ensure a high energy yield. The solar pockets are suitable for all self-sufficient battery applications, e.g. for motorhomes and caravans, camping and tents, marine sailing boats, campervans, panel vans (including off-road vehicles such as Land Rover Defender) and in all OffGrid systems. Please note that no charge controller is included with the SunFolder. The reason for this is that in most cases charge controllers are already available or customers would like to choose a charge controller. Technical data Module type 12V Rated power (Pmpp) 140 Wp Max. Daily yield (summer) 840 Wh/d Voltage (Umpp) 22.3 V Current (Impp 6.28 A Open-circuit voltage (Uoc) 26.2 V Short-circuit current (Isc) 6.65 A bypass diode integrated Cell efficiency  >24 Dimensions (closed) 560 x 440 x 22.5 mm Dimensions (open) 560 x 1325 x 7.5 mm Connection cable 5 metres Weight 4,05 kg    

MC4 compatible Y-connector set - for parallel connection of 2 solar modules Interconnect several modules easily with the Multi Contact Principle (MC) With the MC4 connector system, module interconnections are child's play. The MC4 connectors (+ and -) are ideally suited to connect 2 modules in parallel. Due to the simple click and plug system (Snap-In) the handling of the Multicontact connectors is very easy and no further cable fumbling is necessary. Save yourself from an unnecessary cable tangle with the connectors and connect your modules in parallel. The plugs save unnecessary cable lengths to the connections. The plugs have one of the highest protection classes IP67 are extremely durable, weatherproof and resistant. The connectors are always delivered as a set. MC4 Y connector set Rated current max. 30A System voltage max. 1000V Protection class plugged IP67 Protection class II Locking system "Snap-In" Temperature resistant -40°C to +90°C Conductor cross section 4mm² Weather resistant 

Proven reliability The complete bridging additionally with a ring transformer topology has proven itself for years. The inverter is short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). PowerControl work with limited generator power, limited shore or mains power The Multi Control remote control panel can be used to set the maximum shore or generator current to be drawn. The MultiPlus then takes into account other connected AC consumers and uses only the current that is "left over" for charging. This prevents the generator or shore power connection from being overloaded. PowerAssist "power boost" of generators and shore power support (800VA/1200VA/1600VA only) Load peaks often only occur for a limited period of time. In such a case, the MultiPlus ensures that insufficient shore power or generator power is immediately compensated by energy from the battery. If the load is reduced, i.e. if consumers are switched off, the energy that is then sufficiently available again can be used to charge the batteries. High switch-on power This is required for switching on loads with high inrush currents such as voltage converters for LED lamps, halogen lamps or power tools. Search mode When the search mode is set to 'on', the power consumption of the inverter is reduced by approximately 70% during no-load operation. In this mode, when operating in inverter mode, the multi will turn off at zero load or when only a light load is present and turn back on for a short period every two seconds. If the output current exceeds a set limit, the inverter resumes operation. If this is not the case, the inverter switches off again. Programmable relay In the default setting, the multifunction relay acts as an alarm relay, i.e. it switches off the device in the event of faults (device becomes too hot, ripple voltage at the input too high, battery voltage too low).

Victron Energy charging connector plug 16A/250Vac

For fixing the wheel rails when folded down.

Liontron LiFePO4-Batterie Die LIONTRON LiFePO4-Batterie bietet eine Vielzahl von Vorteilen und stellt somit die ideale Lösung für die häufigsten Anwendungen dar. Im Folgenden sind die wesentlichen Merkmale aufgeführt: Langlebigkeit: Über 3.000 Lade- und Entladezyklen, selbst bei regelmäßigen tiefen Entladungen. Gewicht: LiFePO4-Akkus wiegen bei gleicher Kapazität 50 % weniger als herkömmliche Bleibatterien. Kapazität: 100 % der Kapazität sind nutzbar, mit bis zu 15 % höherer Kapazität als angegeben. Sicherheit: Lithium-Eisenphosphat keine Gase, kein Kobalt und keine Explosions- oder Brandgefahr. Ladegeschwindigkeit: Schnelle und effiziente Vollladung in kürzester Zeit. Widerstandsfähigkeit: Mit IP67-Klassifizierung und Arctic-Paket ist die Batterie auch unter extremen Bedingungen einsetzbar. Nachhaltigkeit: Kein verklebtes Gehäuse oder verschweißte Zellen, Austausch einzelner Komponenten ist leicht möglich. Garantie: Volle 10 Jahre Herstellergarantie. Kostengünstige Reparaturen nach der Garantiezeit sind möglich. Vorteile im Detail Die LIONTRON LiFePO4-Batterie ist der vollwertige Ersatz für Bleibatterien und bietet alle Vorteile von Lithium-Eisenphosphat. Sie ermöglicht eine erhebliche Gewichtsreduzierung, enorme Energiereserven und eine stabile Spannung, selbst unter extremen Belastungen. Während Bleibatterien nach maximal 800 Ladezyklen an Kapazität verlieren, meistert die LiFePO4-Batterie problemlos 3.000 Ladezyklen und bietet selbst nach weiteren 7.000 Zyklen eine gute Performance. Das intelligente Batteriemanagementsystem (BMS) überwacht kontinuierlich den Status der einzelnen Zellen und schützt sie vor schädlichen Einflüssen. Mit der integrierten Bluetooth 4.0-Überwachung haben Sie alle wichtigen Batteriedaten jederzeit auf Ihrem Smartphone oder Tablet im Blick: Batterie-Ladezustand in % Batteriespannung Lade-/Entladestrom Verbleibende Kapazität Batterietemperatur Anzahl der Lade-/Entladezyklen Nenn-/Kapazität Robust und zuverlässig – auch unter extremen Bedingungen Die IP67-Klassifizierung garantiert, dass das Batteriengehäuse staubdicht und wasserfest ist. Diese Robustheit macht die Batterie ideal für anspruchsvolle Umgebungen, wie im Motorraum eines Fahrzeugs. Die LIONTRON® LX Arctic LiFePO4-Batterien sind bis zu -30 °C einsatzfähig und verfügen über energieeffiziente Heizelemente, die die Zelltemperatur über dem Gefrierpunkt halten. Ideal für Caravans, Reisemobile und Camper. Garantie und wichtige Informationen 10 Jahre Herstellergarantie: Gilt für Käufe ab dem 1.9.2024. Für Batterien mit einem Kaufdatum ab dem 1.1.2023 bis zum 31.8.2024 gilt weiterhin die 7-jährige Garantie. Installationen: Die Batterie ist nur für 12V-Installationen geeignet. Eine Parallelschaltung zur Erhöhung der Kapazität ist möglich (Serienschaltung auf z.B. 24V ist nicht möglich).Die Batterien verfügen über keine klassischen Batteriepole. Für den Austausch gegen herkömmliche Bleiakkus werden passende Batteriepole benötigt. Bluetooth-Verbindung: Um die Verbindung zwischen Batterie und Smartphone/Tablet herzustellen, muss das Gerät Bluetooth Version 4.0 unterstützen. Gerätekompatibilität: Um die Lebensdauer nicht zu verkürzen, sollten die angeschlossenen Geräte für den Betrieb mit Lithiumbatterien ausgelegt sein. Mehr erfahren auf liontron.com

MC4 compatible Y-connector set - for parallel connection of 2 solar modules Interconnect several modules easily with the Multi Contact Principle (MC) With the MC4 connector system, module interconnections are child's play. The MC4 connectors (+ and -) are ideally suited to connect 2 modules in parallel. Due to the simple click and plug system (Snap-In) the handling of the Multicontact connectors is very easy and no further cable fumbling is necessary. Save yourself from an unnecessary cable tangle with the connectors and connect your modules in parallel. The plugs save unnecessary cable lengths to the connections. The plugs have one of the highest protection classes IP67 and are extremely durable, weatherproof and resistant. The connectors are always supplied as a set. MC4 Y connector set Rated current max. 30A System voltage max. 1000V Protection class plugged IP67 Protection class II Locking system "Snap-In" Temperature resistant -40°C to +90°C Weather resistant 

The GX-GSM is a modem & GPS accessory for Victron GX monitoring products. It is a cellular modem that provides mobile internet for the system and connection to the VRM portal. It works on 2G, 3G and 4G networks and includes a built-in GPS receiver.When the optional GPS antenna is installed, the system can be both located and geographically constrained via the VRM portal.Note that many telecom operators are in the process of shutting down their 3G networks.

DC-DC Charger Orion-Tr Smart DC/DC Charger   Suitable for Bluetooth Smart Monitoring, changing settings and updating the charger when new software functions become available can be done with any Bluetooth enabled smartphone, tablet or other device. Fully programmable - Battery charging algorithm (configurable) or fixed output.- Intelligent generator compatibility: engine run detection. Adaptive 3-stage charging algorithm: constant current -constant voltage -maintenance. For lead acid batteries, it is important to keep the recording time short during shallow discharges to avoid overcharging the battery. After a deep discharge, the constant voltage duration is automatically extended to ensure that the battery fully charges.For lithium batteries, the recording time is fixed, by default 2 hours.Alternatively, a fixed output voltage can be selected.Remote on/off A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the H (right) terminal of the two-pin plug can be connected to a battery positive terminal or the L (left) terminal of the two-pin plug can be connected to the battery negative terminal (or to the body of a vehicle, for example). All models are short-circuit proof and can be connected in parallel to increase output current. An unlimited number of units can be connected in parallel. Overtemperature protection The output current is reduced at high ambient temperatures. Protection class IP43 When the screw terminals on the device are installed facing downwards. Screw terminals No special tools are required for installation. Input protection fuse (non-replaceable)

The Growatt ShineLan-X is a Wi-Fi dongle. It is specifically designed for online monitoring and maintenance of Growatt three-phase inverters series -X, -XH and -XE. Plug and Play and a direct Ethernet connection make configuration very easy. The built-in memory stores data for up to one month.

Victron Phoenix Voltage Converter 400W High-quality sine wave inverter for a stable 230V supply for small consumers Victron's Phoenix 12/500 VE.Direct is a high-quality sine wave inverter ideal for powering small 230V consumers on board. The continuous output power is 400 watts, which is sufficient for micro consumers such as laptops, battery chargers, mini PCs and other devices with small power requirements. However, it is also ideal for high-sensitivity radio, receiver as well as medical equipment. Proven reliabilityThe complete bridging additionally with a ring transformer topology has proven itself for years. The inverters are short-circuit proof and protected against overheating (whether caused by overload or ambient temperature). VE.Direct communication portThe VE.Direct port can be connected to the following devices: With a computer (VE.Direct to USB interface cable required). To Apple and Android smartphones, tablets, Macbooks or other devices (VE.Direct Bluetooth smart dongle required). Fully configurable: Thresholds to trigger and reset low battery alarms. Thresholds to turn off and restart at low battery voltage levels. Output voltage 210 - 245V Frequency 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor monitoring: Input and output voltage and current alarms Other features at a glance: Power 400 W Brand quality from the Netherlands Output voltage with mains quality (pure sine wave) Compromise and trouble-free operation of small consumers such as laptop or chargers or mini PCs. Compact, light, robust and reliable programmable via VE.Direct connection numerous information readable via VE.Direct connection

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the functions of the MultiPlus plus an option of an external current transformer to implement the PowerControl, as well as PowerAssist functions or to optimize self-consumption with external current sensing (max. 32 A). It also offers all the features of the MultiGrid with the built-in anti-islanding function and an ever-growing list of countries where it is approved for feeding. A MultiPlus, plus ESS (Energy Storage System) function The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It offers all the functions of the MultiPlus, plus an external current sensor option that extends the function of the PowerControl and PowerAssist to 32 amps. It also offers all the features of the MultiGrid with the built-in anti-islanding feature and an ever-growing list of countries where it is approved for power feeding. Remote monitoring and control You can monitor and control your MultiPlus-II and system(s) on-site (LAN) or remotely anywhere in the world via the Internet using the free VRM App and the free VRM Portal website. It can be accessed from a phone, tablet, laptop or PC running a wide variety of operating systems. There are countless control options: For example, with the required Color Control GX or Venus GX, you can adjust your MultiPlus-II or have a back-up generator start automatically.

WATTSTUNDE®SunFolder solar module Generate solar energy simply and innovatively - with the new WATTSTUNDE® SunFolder solar bag it's quick and easy. Unfold the bag, connect it and generate energy. Lightweight, innovative and flexibleThanks to its innovative design, the WATTSTUNDE® SunFolder 340Wp solar bag is very light, absolutely space-saving and therefore offers a high degree of flexibility and usability. The solar bag scores with its ability to be freely aligned at any time. Whether behind the windscreen when parked or simply outdoors. You can place the solar bag wherever the sun shines. In addition, you are guaranteed a high energy yield from the SunPower Back-Contact solar cells. Thanks to the hard-wearing and water-repellent Cordura fabric, the bag can also be used in the rain. Practical feet allow the solar modules to be placed at an angle so that the solar radiation can be used optimally. Plug & Play with practical plug-in systemThe SunFolder solar bag from WATTSTUNDE® has a 5m long connection cable with an Anderson plug-in system at the end. Thanks to the practical plug-in system, the connection plug can be permanently attached to the charge controller and, if required, the solar bag can be taken out, hung in the sun or placed in the sun and you simply plug the two Anderson mating plugs together and the SunFolder is connected to the charge controller. It could hardly be quicker and more practical. Self-sufficient with SunPower solar cellsThe SunFolder solar pockets of the WATTSTUNDE® series are high-quality modules with SunPower cells that deliver optimum results and ensure a high energy yield. The solar pockets are suitable for all self-sufficient battery applications, e.g. for motorhomes and caravans, camping and tents, marine sailing boats, campervans, panel vans (including off-road vehicles such as Land Rover Defender) and in all OffGrid systems. Please note that no charge controller is included with the SunFolder. The reason for this is that in most cases charge controllers are already available or customers would like to choose a charge controller. Module type 12V  Nominal power (Pmpp) 340 Wp Max. Daily yield (summer) 2040 Wh/d Voltage (Umpp) 33.0 V Current (Impp) 10.30 A Open-circuit voltage (Uoc)  38.8 V Short-circuit current (Isc) 10.92 A bypass diode Integrated Dimensions (closed)  690 x 440 x 30 mm Dimensions (open) 690 x 2700 x 7.5 mm Connection cable 5 metres Weight 9.42 kg