WATTSTUNDE Solar Roof Duct, 1 Input, Black
Roof duct / cable input made of ABS plastic black universal fit One duct UV stable
€9.90*
Ready to ship immediately, Delivery time 1-3 working days
Product number:
DX1S
Product information "WATTSTUNDE Solar Roof Duct, 1 Input, Black"
WATTSTUNDE® ABS Roof Duct One Input
For gluing to the vehicle roof with PG screw connection for a cable gland
The ABS roof duct is simply bonded to the vehicle roof with Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm.
- One cable input
- With PG gland
- Made of ABS plastic
- Aerodynamic shape prevents driving noise
- Black and inconspicuous
- Can be mounted with Sikaflex or Betalink K1 adhesive
- UV and weather resistant
- Holds cables with a diameter of 4mm - 12mm tightly
- Dimensions approx. L 13 x W 4.5 x H 4 cm
The WATTSTUNDE® roof ducts promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out.
The roof ducts round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.
We recommend
WATTSTUNDE Solar Roof Duct, 1 Entrance, White
€9.90*
WATTSTUNDE® ABS Roof Duct One Input For gluing to the vehicle roof with PG screw connection for a cable entry. The ABS roof duct is simply bonded to the vehicle roof with Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. One cable input With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Black and inconspicuous Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 4.5 x H 4 cm The WATTSTUNDE® roof bushings promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof bushings round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.
WATTSTUNDE Solar Roof Duct, 2 Inputs, Black
€10.90*
WATTSTUNDE® ABS Roof Duct Two Entrances For gluing to the vehicle roof with PG screw connection for cable input The ABS roof gland is simply glued to the vehicle roof with our Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. Two cable inputs With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 9.5 x H 4 cm The WATTSTUNDE® roof ducts promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof bushings round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.
WATTSTUNDE Solar Roof Duct, 2 Inputs, White
€10.90*
WATTSTUNDE® ABS Roof Bushing Two Inputs For gluing to the vehicle roof with PG screw connection for cable entry The ABS roof gland is simply glued to the vehicle roof with our Betalink K1 or Sikaflex adhesive 252i. The PG glands can squeeze a maximum cable diameter of 12mm and a minimum cable diameter of 4mm. Two cable inputs With PG gland Made of ABS plastic Aerodynamic shape prevents driving noise Can be mounted with Sikaflex or Betalink K1 adhesive UV and weather resistant Holds cables with a diameter of 4mm - 12mm tightly Dimensions approx. L 13 x W 9.5 x H 4 cm The WATTSTUNDE® roof bushings promise top safety. They are both UV and weather resistant and absolutely waterproof (IP68 standard). The PG safety cable glands ensure flush and gap-free sheathing of the cables, so that the penetration of dirt and water can be ruled out. The roof ducts round off your motorhome mounting system consisting of retaining spoilers, mounting corners and connectors and enable a solid mounting of your solar island system on the vehicle roof and a safe introduction of the cables into the living space.
PV cable 6mm red
€1.69*
MwSt:
mit MwSt
Technical data 6mm red: Rated voltage 1500 V Conductor stranding: tinned copper strands, according to DIN VDE 0295 KI.5, fine strands, IEC 60228 cl.5 Outer diameter: 6.2mm Special features: Flame retardant; Halogen free; UV resistant Test voltage: 6500 V Insulation material: Copolymer Standards: EN 50618; TÜV Rheinland 2 PfG 1990/05.12; TÜV R60115689
PV cable 6mm black
€1.69*
MwSt:
mit MwSt
Technical Data 6mm black: Rated voltage 1500 V Conductor stranding: tinned copper strands, according to DIN VDE 0295 KI.5, fine strands, IEC 60228 cl.5 Outer diameter: 6.2mm Special features: Flame retardant; Halogen free; UV resistant Test voltage: 6500 V Insulation material: Copolymer Normen EN 50618; TÜV Rheinland 2 PfG 1990/05.12; TÜV R60115689
WATTSTUNDE Holding Spoiler Connector White
€19.90*
WATTSTUNDE® Holding Spoiler Connector Motorhome mounting bracket white for one or more solar modules made of solid ABS plastic. With these solar connectors, larger solar modules can be fastened absolutely securely and easily. The connectors are suitable either to connect several modules together or to give large modules more stability. Solid holding pillar connectors universal fit UV resistant Weather resistant Made of solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws Manufacturer warranty 20 years The retaining spoilers are bonded to the vehicle roof together with the module, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive. The profiles provide better wind resistance while driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module.WATTSTUNDE® solar mounts and fasteners differ from many others based on their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, therefore Wattstunde® offers 20 years manufacturer warranty on the mounting spoilers!
WATTSTUNDE Solar Module Holding Corners White
€24.90*
WATTSTUNDE® Holding Spoiler Corners Motorhome mounting spoiler corners made of solid ABS solid plastic for mounting solar modules on the vehicle roof. Use these retaining spoiler corners as aerodynamic fasteners for small solar modules or as additional stabilization for larger modules to ensure optimum and secure hold on the roof of your motor home. Solid holding spoiler corners UV resistant Weather resistant Made of solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws With these solar mounting corners (4 pcs.) solar modules can be mounted absolutely safe and easy. Before mounting and bonding the holding spoilers, the holding spoilers are screwed to the corners of the solar module. Then the profiles are bonded together with the module on the vehicle roof, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive (available in the store). The profiles provide better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimum rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. WATTSTUNDE® solar mounts and fasteners stand out from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the mounting spoilers!
WATTSTUNDE Holding Spoiler Set 53cm White
€34.90*
WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 53cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount your solar modules absolutely safe and easy even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.
WATTSTUNDE Holding Spoiler Set 53cm Black
€34.90*
WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 53cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount safely and easily your solar modules even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.
WATTSTUNDE Solar Module Holding Corners Black
€24.90*
WATTSTUNDE® Holding Spoiler Corners Motorhome mounting spoiler corners made of solid ABS solid plastic for mounting solar modules on the vehicle roof. Use these retaining spoiler corners as aerodynamic fasteners for small solar modules or as additional stabilization for larger modules to ensure optimum and secure hold on the roof of your motor home. Solid holding spoiler corners UV resistant Weather resistant Made of solid solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws With these solar mounting corners (4 pcs.) solar modules can be mounted absolutely safe and easy. Before mounting and bonding the holding spoilers, the holding spoilers are screwed to the corners of the solar module. Then the profiles are bonded together with the module on the vehicle roof, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive (available in the store). The profiles provide better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimum rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. WATTSTUNDE® solar mounts and fasteners stand out from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the mounting spoilers!
WATTSTUNDE Holding Spoiler Connector Black
€19.90*
WATTSTUNDE® Holding Spoiler Connector Motorhome mounting bracket black for one or more solar modules made of solid ABS plastic. With these solar connectors, larger solar modules can be fastened absolutely securely and easily. The connectors are suitable either to connect several modules together or to give large modules more stability. Solid holding pillar connectors universal fit UV resistant Weather resistant Made of solid solid plastic Aerodynamic shape prevents driving noise Easy to install with Sikaflex 252i or Betalink K1 adhesive incl. stainless steel screws Manufacturer warranty 20 years The retaining spoilers are bonded to the vehicle roof together with the module, either with Betalink K1 adhesive or Sikaflex 252i construction adhesive. The profiles provide better wind resistance while driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. WATTSTUNDE® solar mounts and fasteners differ from many others due to their very high load-bearing capacity and UV and weather-resistant surface sealing. Quality makes the difference, therefore Wattstunde® offers 20 years manufacturer warranty on the mounting spoilers!
WATTSTUNDE Holding Spoiler Set 68cm White
€38.90*
WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 68cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can safely and easily mount your solar modules even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.
WATTSTUNDE Holding Spoiler Set 68cm Black
€38.90*
WATTSTUNDE® Solar Holding Spoiler Set Motorhome mounting spoiler for solar modules made of solid ABS all-plastic The WATTSTUNDE® solar module holders give you the opportunity to mount your modules safely, efficiently and elegantly on your vehicle roof. 2 spoilers in a set Length: 68cm suitable for many solar modules from 50-120 watts Easy to mount UV and ozone resistant Aerodynamic shape prevents driving noise Can be mounted with Sikaflex 252i or Betalink K1 adhesive Extremely weather resistant incl. stainless steel screws Manufacturer warranty 20 years With these aerodynamic brackets you can mount your solar modules absolutely safe and easy even without previous knowledge. The brackets have drill holes on both sides of the support surfaces. The modules can be glued or screwed to the holding spoilers. When screwing the modules, they can be removed again without further ado if necessary. For bonding, we recommend the strong construction adhesive Sikaflex 252i or Betalink K1 for a strong adhesive result. We explicitly advise against using any sealants for bonding! The profiles ensure better wind resistance when driving and, due to the distance between the solar module and the mounting surface, optimal rear ventilation of the module. Thus, compared to direct mounting, a significant increase in performance can be achieved by cooling the solar panel. An investment that pays off! Quality makes the difference, which is why Wattstunde® offers a 20-year manufacturer's warranty on the retaining spoilers! The WATTSTUNDE® holding spoiler systems and roof penetrations are different from many others due to their very high load-bearing capacity as well as the UV and weather-resistant surface sealing. The elegant appearance of the retaining spoiler in combination with the module creates a sophisticated image on your vehicle roof.