Lithium iron phosphate LiFePO4 12.8V 200Ah Under-Seat Battery with bluetooth
Lithium iron phosphate LiFePO4 12.8V 200Ah, suitable for use down to -30°C with fully integrated BMS and Bluetooth monitoring.
€2,320.00*
Ready to ship immediately, Delivery time 1-3 working days
Free shipping
Product number:
LIDUCSM12200LX-A
Product information "Lithium iron phosphate LiFePO4 12.8V 200Ah Under-Seat Battery with bluetooth"
Lithium iron phosphate LiFePO4 12.8V 150Ah, suitable for use down to -30°C with full integrated BMS and Bluetooth monitoring. Motorhome battery specially designed for mounting under the passenger seat.
- Easy to install under the passenger seat in many motorhomes due to the low height.
- Extremely cycle resistant with over 3000 cycles at 90% depth of discharge (DoD).
- One-for-one interchangeable with AGM/GEL lead-acid batteries without changing the charge/discharge structure.
- 150Ah LiFePo4 replace approximately a 300Ah lead acid battery in function
- Low weight only 21 kg (-24 kg compared to AGM lead 45 kg)
The battery can be opened quickly and easily for service purposes by loosening four screws. This allows a cost-effective repair as well as uncomplicated replacement. Gone are the days when a battery had to be replaced completely even if only a single cell or a small electronic component failed.
The housing is not glued and the individual components are not soldered or encapsulated. Cost-effective repairs and long availability of spare parts thus enable sustainable use of the product far beyond the warranty period.
The installed round cells are screwed together and can therefore be replaced individually without the need for special tools. Functional components can be reused in the event of a repair. This saves costs and resources for the consumer and the environment Easy
- Opening the battery by loosening only four screws.
- No glued housing.
- No soldered cells.
- Uncomplicated low-cost service and repair.
- Replacement of individual components possible.
- Sustainable usability of the product even far beyond the warranty period of 5 years.
Dimensions (LxWxH) 395 x 280 x 187mm
Characteristics "Lithium iron phosphate LiFePO4 12.8V 200Ah Under-Seat Battery with bluetooth"
| Battery Type: | LifePO4 |
|---|---|
| Capacity: | 200Ah |
| Connection Type: | M8 |
| Dimensions: | 39,5 x 18,7 x 28 cm |
| Manufacturer warranty: | 7 Jahre |
| Max. Power: | 150 A |
| Netzspannung: | 12,8 Volt |
| Specifications: | ARCTIC (Winterfest bis -30 °C) BMS Integriert, Bluetooth, Wartungsfrei |
| Weight (kg): | 26,5 |
Dokumente / Downloads
We recommend
Free shipping
Victron Energy Blue Smart IP67 Charger 12/7 12V 7Amp
€119.00*
Battery Chargers Blue Power IP67 Blue Power IP 67 charger Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt which is about five to ten times better than the industry standard.
Free shipping
Victron Energy Blue Smart IP67 Charger 12/17 230V - 1 Connector
€174.94*
Battery Chargers Blue Power IP67 Blue Power IP 67 charger 12/17 230V Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output whichis always powered as long as 180 - 265 V AC is available an an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.
Free shipping
Victron Energy Blue Smart IP67 Charger 24/12 230V - 1 Connector
€238.00*
Battery Chargers Blue Power IP67 Blue Power IP 67 charger 24/12 230V Fully encased: waterproof, shockproof and fire retardant. Water, oil or dirt cannot damage the Blue Power IP67 charger. The case is made of cast aluminum and the electronics are coated with resin. Start interruption The models with addition (1+Si) have a second current-limited output which is always powered as long as 180 - 265 V AC is available as an input. This output can be used, for instance, to prevent a vehicle from being started before the battery charger has been disconnected (start interrupt function). Highest charging efficiency ever! A new industry standard is set: with an efficiency of 92% or even higher, these chargers waste three to four times less heat. Also, after the battery is fully charged, the power consumption drops to less than one watt, which is about five to ten times better than the industry standard.
Free shipping
Victron Energy Phoenix Inverter 12/2000 230V Smart
€953.18*
MwSt:
mit MwSt
InverterPhoenix Inverter Smart Built-in Bluetooth function: fully configurable via a tablet or smartphone Low battery voltage alarm Low battery voltage shutdown and restart thresholds Dynamic shutdown: load-dependent shutdown threshold value Output voltage: 210 - 245V Frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay Monitoring: input and output voltage, load and alarms The VE.Direct communication port can be connected to a computer (VE.Direct to USB interface cable required) to configure and monitor the same parameters. Proven reliability The full bypass in addition with a ring transformer topology has been proven for years.The inverters are short-circuit proof and protected from overheating (whether caused by overload or ambient temperature). High inrush power This is required for switching on loads such as voltage converters for LED lamps, halogen lamps or power tools. ECO mode In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold during this time, the inverter remains on. Remote on/off switching A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the H (left) terminal of the two-pin connector can be connected to a battery positive terminal or the L (right) terminal of the two-pin connector can be connected to the battery negative terminal (or to the body of a vehicle, for example).
Free shipping
Victron Energy BlueSmart IP22 12/30 Charger - 3 Connectors
€276.08*
Battery ChargersBlue Power IP22 High efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard. Also, after the battery is fully charged, power consumption drops to less than 0.5 watts, which is about five to ten times better than the industry standard. Adaptive 6-stage charging algorithm The Blue Power charger features a microprocessor-controlled adaptive battery management. Adaptive means that the charging process is automatically adjusted to the type of battery usage. Storage mode: less maintenance and aging when the battery is not in use Storage mode is activated whenever there has been no discharge within 24 hours. The charge maintenance voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage. This provides a type of equalization charge that prevents electrolyte stratification and sulfation, the two main causes of premature battery failure. Also charges lithium-ion (LiFePO4) batteries LiFePO4 batteries are charged using a simple constant current phase > constant voltage phase > charge retention voltage phase algorithm. The NIGHT and LOW settings When the unit is in NIGHT or LOW mode, the output current is reduced to a maximum of 25% of the rated output and the charger operates absolutely silently. The NIGHT mode ends automatically after 8 hours. The LOW mode can be terminated manually. Protection against overheating The output current is reduced when the temperature rises up to 50°C, but the Blue Power charger does not fail.
Free shipping
Victron Energy Phoenix Inverter 12/1600 230V Smart
€890.12*
MwSt:
mit MwSt
InverterPhoenix Inverter Smart Built-in Bluetooth function: fully configurable via a tablet or smartphone Low battery voltage alarm Low battery voltage shutdown and restart thresholds Dynamic shutdown: load-dependent shutdown threshold value Output voltage: 210 - 245V Frequency: 50 Hz or 60 Hz Threshold for ECO mode on/off and ECO mode sensor Alarm relay Monitoring: input and output voltage, load and alarms The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable required) to configure and monitor the same parameters. Proven reliability The full bypass in addition with a ring transformer topology has been proven for years.The inverters are short-circuit proof and protected from overheating (whether caused by overload or ambient temperature). High inrush power This is required for switching on loads such as voltage converters for LED lamps, halogen lamps or power tools. ECO mode In ECO mode, the inverter switches to standby as soon as the load drops below a preset value. In standby mode, the inverter then switches on for a short period every 2.5 seconds (adjustable). If the load exceeds the preset threshold during this time, the inverter remains on. Remote on/off switching A remote on/off switch or relay contact can be connected to the two-pin connector. Alternatively, the H (left) terminal of the two-pin connector can be connected to a battery positive terminal or the L (right) terminal of the two-pin connector can be connected to the battery negative terminal (or to the body of a vehicle, for example).
Free shipping
Lithium iron phosphate LiFePO4 12.8V 150A Under-Seat Battery with bluetooth
€1,767.00*
MwSt:
mit MwSt
Lithium iron phosphate LiFePO4 12.8V 150Ah, suitable for use down to -30°C with full integrated BMS and Bluetooth monitoring. Motorhome battery specially designed for mounting under the passenger seat. Easy to install under the passenger seat in many motorhomes due to the low height. Extremely cycle resistant with over 3000 cycles at 90% depth of discharge (DoD). One-for-one interchangeable with AGM/GEL lead-acid batteries without changing the charge/discharge structure. 150Ah LiFePo4 replace approximately a 300Ah lead acid battery in function Low weight only 21 kg (-24 kg compared to AGM lead 45 kg) The battery can be opened quickly and easily for service purposes by loosening four screws. This allows a cost-effective repair as well as uncomplicated replacement. Gone are the days when a battery had to be replaced completely even if only a single cell or a small electronic component failed. The housing is not glued and the individual components are not soldered or encapsulated. Cost-effective repairs and long availability of spare parts thus enable sustainable use of the product far beyond the warranty period. The installed round cells are screwed together and can therefore be replaced individually without the need for special tools. Functional components can be reused in the event of a repair. This saves costs and resources for the consumer and the environment Easy Opening the battery by loosening only four screws. No glued housing. No soldered cells. Uncomplicated low-cost service and repair. Replacement of individual components possible. Sustainable usability of the product even far beyond the warranty period of 5 years. Dimensions (LxWxH) 395 x 280 x 187mm
Variants from €1,484.87*
Free shipping
Lithium iron phosphate LiFePO4 12.8V 200Ah Under-Seat Battery with bluetooth
€2,320.00*
MwSt:
mit MwSt
Lithium iron phosphate LiFePO4 12.8V 150Ah, suitable for use down to -30°C with full integrated BMS and Bluetooth monitoring. Motorhome battery specially designed for mounting under the passenger seat. Easy to install under the passenger seat in many motorhomes due to the low height. Extremely cycle resistant with over 3000 cycles at 90% depth of discharge (DoD). One-for-one interchangeable with AGM/GEL lead-acid batteries without changing the charge/discharge structure. 150Ah LiFePo4 replace approximately a 300Ah lead acid battery in function Low weight only 21 kg (-24 kg compared to AGM lead 45 kg) The battery can be opened quickly and easily for service purposes by loosening four screws. This allows a cost-effective repair as well as uncomplicated replacement. Gone are the days when a battery had to be replaced completely even if only a single cell or a small electronic component failed. The housing is not glued and the individual components are not soldered or encapsulated. Cost-effective repairs and long availability of spare parts thus enable sustainable use of the product far beyond the warranty period. The installed round cells are screwed together and can therefore be replaced individually without the need for special tools. Functional components can be reused in the event of a repair. This saves costs and resources for the consumer and the environment Easy Opening the battery by loosening only four screws. No glued housing. No soldered cells. Uncomplicated low-cost service and repair. Replacement of individual components possible. Sustainable usability of the product even far beyond the warranty period of 5 years. Dimensions (LxWxH) 395 x 280 x 187mm