10 m cable extension for the SunFolder solar bags. With this practical extension cable, the connection cable of the foldable solar bags from the SunFolder series can be extended easily and without much additional effort. The pre-assembled cable has Anderson plugs at both ends, so that the extension can be plugged together effortlessly. The generous cable cross-section of 4mm² minimizes electrical losses. Product features: Cable extension, can be connected via plug and play 5 m length 2x6mm² Splash-proof reverse polarity protected compatible with the WS80SF / WS120SF / WS180SF / WS220SF case

WATTSTUNDE®SunFolder solar module Generate solar energy simply and innovatively - with the new WATTSTUNDE® SunFolder solar bag it's quick and easy. Unfold the bag, connect it and generate energy. Lightweight, innovative and flexibleThanks to its innovative design, the WATTSTUNDE® SunFolder 140Wp solar bag is very light, absolutely space-saving and therefore offers a high degree of flexibility and usability. The solar bag scores with its ability to be freely aligned at any time. Whether behind the windscreen when parked or simply outdoors. You can place the solar bag wherever the sun shines. In addition, you are guaranteed a high energy yield from the SunPower Back-Contact solar cells. Thanks to the durable and water-repellent Cordura fabric, the bag can also be used in the rain. Practical feet allow the solar modules to be placed at an angle so that the solar radiation can be used optimally. Plug & Play with practical plug-in systemThe SunFolder solar bag from WATTSTUNDE® has a 5m long connection cable with an Anderson plug-in system at the end. Thanks to the practical plug-in system, the connection plug can be permanently attached to the charge controller and, if required, the solar bag can be taken out, hung in the sun or placed in the sun and you simply plug the two Anderson mating plugs together and the SunFolder is connected to the charge controller. It could hardly be quicker and more practical. Self-sufficient with SunPower solar cellsThe SunFolder solar pockets of the WATTSTUNDE® series are high-quality modules with SunPower cells that deliver optimum results and ensure a high energy yield. The solar pockets are suitable for all self-sufficient battery applications, e.g. for motorhomes and caravans, camping and tents, marine sailing boats, campervans, panel vans (including off-road vehicles such as Land Rover Defender) and in all OffGrid systems. Please note that no charge controller is included with the SunFolder. The reason for this is that in most cases charge controllers are already available or customers would like to choose a charge controller. Technical data Module type 12V Rated power (Pmpp) 140 Wp Max. Daily yield (summer) 840 Wh/d Voltage (Umpp) 22.3 V Current (Impp 6.28 A Open-circuit voltage (Uoc) 26.2 V Short-circuit current (Isc) 6.65 A bypass diode integrated Cell efficiency  >24 Dimensions (closed) 560 x 440 x 22.5 mm Dimensions (open) 560 x 1325 x 7.5 mm Connection cable 5 metres Weight 4,05 kg    

WATTSTUNDE®SunFolder solar module Generate solar energy simply and innovatively - with the new WATTSTUNDE® SunFolder solar bag it's quick and easy. Unfold the bag, connect it and generate energy. Lightweight, innovative and flexibleThanks to its innovative design, the WATTSTUNDE® SunFolder 340Wp solar bag is very light, absolutely space-saving and therefore offers a high degree of flexibility and usability. The solar bag scores with its ability to be freely aligned at any time. Whether behind the windscreen when parked or simply outdoors. You can place the solar bag wherever the sun shines. In addition, you are guaranteed a high energy yield from the SunPower Back-Contact solar cells. Thanks to the hard-wearing and water-repellent Cordura fabric, the bag can also be used in the rain. Practical feet allow the solar modules to be placed at an angle so that the solar radiation can be used optimally. Plug & Play with practical plug-in systemThe SunFolder solar bag from WATTSTUNDE® has a 5m long connection cable with an Anderson plug-in system at the end. Thanks to the practical plug-in system, the connection plug can be permanently attached to the charge controller and, if required, the solar bag can be taken out, hung in the sun or placed in the sun and you simply plug the two Anderson mating plugs together and the SunFolder is connected to the charge controller. It could hardly be quicker and more practical. Self-sufficient with SunPower solar cellsThe SunFolder solar pockets of the WATTSTUNDE® series are high-quality modules with SunPower cells that deliver optimum results and ensure a high energy yield. The solar pockets are suitable for all self-sufficient battery applications, e.g. for motorhomes and caravans, camping and tents, marine sailing boats, campervans, panel vans (including off-road vehicles such as Land Rover Defender) and in all OffGrid systems. Please note that no charge controller is included with the SunFolder. The reason for this is that in most cases charge controllers are already available or customers would like to choose a charge controller. Module type 12V  Nominal power (Pmpp) 340 Wp Max. Daily yield (summer) 2040 Wh/d Voltage (Umpp) 33.0 V Current (Impp) 10.30 A Open-circuit voltage (Uoc)  38.8 V Short-circuit current (Isc) 10.92 A bypass diode Integrated Dimensions (closed)  690 x 440 x 30 mm Dimensions (open) 690 x 2700 x 7.5 mm Connection cable 5 metres Weight 9.42 kg